How to locate a file in wms when coding?
Step 1. Check the link on address bar and look for “item=”. In the example below “item=project_list”
http://wms.sanlien.com.tw/sanlien_crm/user.php?item=project_list
Step 2. Connect to wms via FTP and navigate to /var/www/html/sanlien_crm/user.php
Step 3. Look for the case “project_list” and locate the file to edit.

Why is the wms displaying very slow when I click on “ISO”?
The ISO files are too heavy.

How to add a location, devices on location, and users ?
Step 1. Go to wms.sanlien.com.tw/sanlien
Step 2. Login with your credentials
Step 3 . Click on the device or project type (Palert Plus, VMS, Geo Tech)

Step 4. Click the plus icon on the upper right corner to add new devices on the project
Step 5. Edit the name and change the serial numbers

Step 6. Click the top menu bar in order to add location imageStep 7. Paste the devices location to the image you just uploaded

8. Add a user on the location you just created

9. You are all set!

How to find a device ISO2631 report on wms ?

Step 1. Go to wms.sanlien.com.tw/sanlien_crm/
Step 2. Log in your account
Step 3. Click on Palert Plus or the corresponding project name as shown in the picture below :

Step 4. Select the site location on the right menu bar, eg : Napier Port Image

Step 5. Select the device you are looking for the ISO2631 report by clicking on its serial number that’s shown in the location image

Step 6. Click on the dropdown menu and click on ISO

How to configure PX-01 to generate RSHD report and upload on WMS?

README_RSHD_ISO.docx

How to set up a Palert station to upload DIN files to WMS?

Step 1. FTP connect to the station
Step 2. Navigate to /home/pi/Desktop/vAlert/bin/vAlert8.cfg
Step 3. Change serial_number with the serial number of the device and copy and paste the code below at the end of vAlert8.cfg

###########################################

# API
###########################################
[API_CONFIG]
EARTHQUAKE_FALLING_API YES
DIN_FILE_UPLOAD YES

[VWHUB_CONFIG]
FTPIP 125.227.41.128
FTPPORT 2121
USER ubuntu
PASSWORD 86659813
FTPDIR /var/www/html/load_file/loaddata/PalertPlus/serial_number/

Step 4. Save and close
Step 5. Press 4 seconds on the device start button to reload
Step 6. You are all set!

How to add a Palert ISO file to WMS?

Step 1. FTP connect to the station.
Step 2. Navigate to /home/pi/Desktop/vAlert/bin/vAlert8.cfg
Step 3. Change serial_number with the serial number of the device and copy and paste the code below at the end of vAlert8.cfg

###########################################

# API
###########################################
[API_CONFIG]
EARTHQUAKE_FALLING_API YES
ISO2631_FILE_UPLOAD YES

[VWHUB_CONFIG]
FTPIP 125.227.41.128
FTPPORT 2121
USER ubuntu
PASSWORD 86659813
FTPDIR /var/www/html/load_file/loaddata/PalertPlus/serial_number/

Step 4. Save and close
Step 5. Press 4 seconds on the device start button to reload
Step 6. You are all set!

How to enable DORTS on Palert Plus?

Step 1. FTP connect to the station
Step 2. Navigate to /home/pi/Desktop/vAlert/bin/vAlert8.cfg
Step 3. Copy and paste the code below at the end of vAlert8.cfg

###########################################

# DORTS
###########################################
[DORTS_VIBRATION]
BUILDING_TYPE 6
WARNING_DB -6
MAXIMUM_LATCH YES

Step 4. Save and close
Step 5. Press 4 seconds on the device start button to reload
Step 6. You are all set!

How to enable ISO2631 on Palert Plus?

Step 1. FTP connect to the station.
Step 2. Navigate to /home/pi/Desktop/vAlert/bin/vAlert8.cfg
Step 3. Copy and paste the code below at the end of vAlert8.cfg

###########################################

# ISO2631
###########################################
[ISO_2631]
LOCATION_TYPE 2
MAXIMUM_LATCH YES

Step 4. Save and close
Step 5. Press 4 seconds on the device start button to reload
Step 6. Youa all set! Now shake the device!

How to enable DIN on Palert S3?

Step 1. FTP connect to the station
Step 2. Navigate to /home/pi/Desktop/vAlert/bin/vAlert8.cfg
Step 3. Copy and paste the code below at the end of vAlert8.cfg

###########################################

# DIN
###########################################
[DIN_VIBRATION]
FFT_SECONDS 10
DISPLAY_ON_LCD YES
STRUCTURE_TYPE 2
GEO_PHONE NO
RECORD YES
RECORD_ALWAYS YES
WARNING_DB -6
PGA_RELAY YES
RELAY1_ON YES
MAXIMUM_LATCH YES

Step 4. Save and close
Step 5. Press 4 seconds on the device start button to reload
Step 6 You are all set, now shake the device!
Step 7. Open a browser and connect to device web interface
Step 8. Click on “DIN EVENT”

What is ISO2631?

ISO2631 is the international vibration standard which uses the vibration acceleration to set the standard.
See the vibration table below:

What is DIN4150-3?

DIN4150-3 is the German standard for vibration.
DIN4150-3 is to regulate the vibration impact on structures, on X-axis we have the frequency and the Y-axis the Peak Per Velocity (PPV).
Type 1 , Type2 , Type 3 are the types of structures with Type 1 being the least sensible to vibration and Type 3 being the most sensible vibration.

What is DORTS?

DORTS stands for Department Of Rapid Transit but is used on Palert plus to refer to the vibration standard used by the Department Of Rapid Transit in Taipei.
The vibration velocity used in this standard comes from an integration of the acceleration generated by accelerometers in the device.

See the standard table below for vibration:

What is the difference between Palert Plus /Palert S3/PX-01 Web interface?

1. Palert Plus Web interface has “DIN Daily” and “DIN EVENT” reports enabled in the left menu bar
2. Palert S3 web interface has “DORTS” and “ISO Daily” reports enabled in the left menu bar
3. PX-01 has none of the report above enabled on its menu bar

How to switch web version from Palert plus to Palert S3 or PX-01?

Step 1. FTP connect to station
Step 2. Navigate to /var/www/html/php/version.txt
Step 3. Change “Palert Plus” to “Palert Plus S3” or “Px-01”
Step 4. Save and refresh your web page

Recorded file chart displacement is 0

Step 1. FTP connect to station
Step 2. Navigate to /home/pi/Desktop/vAlert/bin/vAlert8.cfg
Step 3. Edit vAlert8.cfg , change “PD_TRIG_ENABLE NO” to “PD_TRIG_ENABLE YES”
Step 4. Save and press 4 seconds on Palert plus/Palert S3 start button to reload

Can’t upload file to Palert Using Palert

Step 1. Use Putty to SSH connect to the station
Step 2. Type the command ‘$ df -h’ and check the available storage
Step 3. If the available storage is 0 (which is most likely the case here), delete some files. If not, please contact TOM or TING for assistance.

Palert web streaming not displaying

Step 1. Open Putty
Step 2. SSH connect to station
Step 3. Type the command $ killall node

If command returns no process named node, type the command “$ node” and enter
If the command above returns “node:command not found”, type the command “$ sudo apt-get install node”

Step 4. Refresh web page

Why is Palert plus web interface blank?

Step 1. Open Putty
Step 2. SSH connect to station
Step 3. Navigate to /etc/php5/apache2/php.ini.
Step 4. Edit the file php.ini at the short_ open_tag=Off and Change “Off ” to “ON”.
Step 5. Save .
Step 6. Reload web page

COAP interface installation and usage

Please download full guideline here

FTP scripts

Purpose of project

Send ftp files and to a remote ftp server and resend them in case of connection faillure.

Note

ftp.sh is only sending the files modified in less than one hour .

Manual Usage

Install FTP server on the Raspberry pi by running the command $ sudo apt-get update then $ sudo apt-get install ftp
Move the ftp.sh file to /home/pi/Desktop/vAlert/bin
Move the ResendFtpFiles.sh to the same folder as above
Navigate to /home/pi/Desktop/vAlert/log
Create a new file named /TobeUploadedList.txt
Make sure that TobeUploadedList.txt is writable by running $ chmod 777 TobeUploadedList.txt
Open a terminal (Mac Terminal , putty, Git Bash)
Type $ ssh pi@<pi_ip_address>
Login and Navigate to /home/pi/Desktop/vAlert/rec
Edit a ramdom file
Navigate to /home/pi/Desktop/vAlert/bin
Run chmod +x ftp.sh
Run $ ./ftp.sh
Check that /home/pi/Desktop/vAlert/log/TobeUploadedList.txt has be written
If /home/pi/Desktop/vAlert/log/TobeUploadedList.txt has been written Run $ chmod +x ResendFtpFiles.sh then$ ./ResendFtpFiles.sh

Crontab schedule Usage

After Testing function with steps above you can schedule the scripts with Crontab to run periodically or at some specific hour of the day

-First you should createa file undert/etc name myftpLog.log by just running $ touch /etc/mydtpLog.log

Then run $ echo “10 12 * * * /home/pi/Desktop/vAlert/bin/./ftp.sh >> /etc/myftpLog.log 2>&1” >> /etc/crontab

Palert/PX-01 web interface upgrade guideline

In this short guideline i’m assuming that you know how to:
– Use a FTP client (WinSCP)
– Set up a Palert station (Power and Ethernet)
– Git command line
Steps to upgrade to web interface:
1. Download the latest version
– Git : $ git clone http://gitlab.sanlien.com.tw/jean/palert-s3-web.git
– Or Manually download the latest version here(click on Palert and download the most recent www zip file)
2. FTP UPLOAD THE LATEST VERSION
– FTP connect to the station with WinSCP or Filezilla
– Navigate to “/var/www/html”
– Drag and drop the latest version that you just downloaded
Still can’t do it? Download the full guideline here

Others

安全監測！人與大地的對話 (1).pdf

03-第三章.pdf

產品與解決方案

TAF實驗室

技術支援

關於我們

相關連結

Product and Solution

Calibration and Repair

Technical Support

About Us

產品與解決方案

TAF實驗室

技術支援

關於我們

相關連結